Profiled Conical Ceramic Sleeve
Complex-Geometry Ceramic Components
Overview
A thin-walled conical sleeve with internal and external tapers, end shoulders and local fillets. The drawing specifies bore fits, end faces and taper transitions.
- Material
- A-95; material standard: GB/T 5593-1996
- Specifications
- Outer diameter Φ71 × inner diameter Φ58.5 × height 36.5 mm
- Forming Method
- Isostatic Pressing
- Key Manufacturing Features
- Thin-walled tapers, mating bores, end shoulders and small local fillets.
Technical Drawing
Technical Requirements
- Downward length of the 52° external taper: ≥2 mm.
- Maintain the tolerance shown for the Φ64 bore.
- A small flat of ≤0.25 mm is permitted on the Φ64 end face.
- Surface roughness Ra for all surfaces: 1.6.
- No pores, spots, damage or other surface defects are permitted.
- The dimension marked ▲ was revised on 2005-07-16 to Φ68.955 (upper deviation 0, lower deviation −0.02).
- The circular view at the upper left is an enlarged detail.
Product Illustration
CONTACT
Contact Us
Contact us by telephone or email to discuss advanced ceramics, precision machining, component design, inspection and joining.
AddressCourtyard No. 1, Wanhong Road, Jiuxianqiao, Chaoyang District, Beijing, China
FocusAdvanced ceramics, precision machining, inspection and assembly
Before You Get in Touch
- Drawings & GeometryComponent name, drawing revision, main dimensions and critical features.
- Material & Service ConditionsKnown material or grade, intended use and operating conditions.
- Quantity & TimingQuantity for this request, future demand and requested delivery date.
- Quality & AssemblyCritical tolerances, surfaces, inspection documents and joining or assembly requirements.
- Available InformationDescribe available drawings, photos or samples and any points to discuss.
- Contact DetailsCompany or project name, contact person and a telephone number or email for a reply.
Start with the information and goals you have; open points can be discussed. The button opens your email app with an outline. Add attachments in your email.